Dimensions 
Diameter housing19 mm
Length60 mm
External cable diameter4 mm ... 8 mm
Stripping length of the sheath29 mm
Stripping length of the individual wire7 mm
Ambient conditions 
Ambient temperature (operation)-40 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (Plug / socket) 
Degree of protectionIP65
 IP67
General 
NoteThis product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling)
 NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Rated current at 40°C4 A (2 A when using 0.14 mm² conductors)
Rated voltage48 V AC
 60 V DC
Number of positions4
Insulation resistance= 100 MO
CodingD - data
Standards/regulationsM12 connector IEC 61076-2-101
 Shock, vibration EN 50155:2001
Signal type/categoryPROFINET CAT5 (on the basis of IEC 11801), 100 Mbps
Status displayNo
Overvoltage categoryII
Degree of pollution3
Connection methodPush-in connection
Conductor cross section0.14 mm² ... 0.75 mm² (without ferrule)
 0.08 mm² ... 0.5 mm² (with ferrule)
 0.14 mm² ... 0.75 mm² (solid)
Conductor cross section AWG26 ... 18 (without ferrule)
 28 ... 20 (with ferrule)
Insertion/withdrawal cycles= 100 (Quantity: 500 with Phoenix Contact mating connector)
Torque0.4 Nm (M12 knurl)
 0.8 Nm (Connector with coupling sleeve)
 3 Nm (Pressure nut with coupling sleeve)
Assembly instructionsThe wires can be connected both with ferrules and without ferrules
Transmission characteristics (category)CAT5
  
More information1424682

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

SACC-M12MSD-4PL SH PN - 1424682

  • 16.20€

  • Ex Tax: 16.20€

Tags: PROFINET, CAT5, (100 Mbps), 4-position, shielded, Plug straight M12